Ideal Motion is a leading supplier of TSB trough slider bed conveyor. TSB trough slider bed conveyor is ideally suited for the following applications: Conveying boxes, bags, cases, and loose parts. Built in guard rails allow for overhead conveying.
Standard Specifications:
Belt - 8", 12", 18", 20", 24", and 30" Black PVC belt. Bed - 12 gauge painted formed steel with 2 1/2" high vertical sides bolted to top of bed. Standard sections are 5 and 10 feet long bolted together with floor supports and splice plates. Tail Pulley - 4" diameter crowned with 1 3/16" diameter shaft. Drive Pulley - 4" diameter and 8" diameter crowned and fully lagged. 4" diameter pulley with 1 3/16" diameter shaft, 8" diameter pulley with 1 7/16" diameter shaft. Snub-Roller - 2" diameter for 4" diameter pulley, 2 1/2" diameter for 8" diameter pulley. Return Idler - 1.9" diameter adjustable, on 10'0" centers. Floor Supports - Adjustable 28 1/2" to 42 1/2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint. Take-Up - 6" long screws located at tail pulley to provide belt tension. Bearings - Sealed-prelubricated with cast iron housings. Speed Reducer - C-Face mounted heavy duty worm gear reducer. Motor - 1/2 HP 230/460-3-60 TE motor. Belt Speed - 60 FPM constant. Capacity - Maximum load per lineal foot of conveyor - 100 lbs. Not to exceed Load Capacity Chart.
TSB - Trough Slider Bed Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
