Ideal Motion is a leading supplier of FTC - inclined slider bed conveyor.

Ideal Motion is a leading supplier of FTC - inclined slider bed conveyor. FTC - inclined slider bed conveyor is ideally suited for the following applications: Booster conveyor for gravity flow systems, Transporting between floors, Center drive.
Standard Specifications: Belt - 14", 18", 24", 30" and 36"wide rough-top belt. Bed - 20", 24", 30", 30", 36" and 42" wide 12 gauge powder painted formed steel slider bed. Bed is 6-1/2" deep x 6 feet, 8 feet or 10 feet long spliced together with splice plates. Under-Trussed Bed - Extra reinforcement to prevent sag in longer bed sections in addition to reinforcing angles, 24 feet and longer. Double Nose-Over - Two 16" long adjustable bed sections provide a two step transition from incline to horizontal with 15° to 35° adjustment. Tail Pulley - 4" diameter, crowned with 1-3/16" diameter shaft through 30" wide belt. 6" diameter tail pulley with 1-7/16" diameter shaft turned down on ends for wider than 30" belt. Drive Pulley - 8" diameter crowned and lagged. 1-7/16" diameter. Snub Roller - 2-1/2" diameter at drive pulley and 2" diameter at tail pulley. Return Idlers -1.9" diameter, adjustable. Take-Up - Located in center drive assembly, provides 24" of belt take-up. Pop-Out Roller - Free floating, 1-3/8" diameter rollers located at tail pulleys with gravity connector rods. Will lift out if anything is caught between pulleys and rollers. Floor Supports - Adjustable stands to give 31" to 45" height at each end;with knee braces. Bearings - Sealed prelubricated with cast iron housings. Speed Reducer - C-Face mounted heavy duty worm gear reducer. Motor - 3/4 HP 230/460-3-60 TE motor. Belt Speed - 60 FPM constant. Capacity - 100 lbs. per foot maximum.		FTC - Inclined Slider Bed Conveyor

Top of Page