Ideal Motion is a leading supplier of SBT slider bed trash conveyor. SBT slider bed trash conveyor is ideally suited for the following applications: Conveying broken down boxes, trash, cases, and loose parts. Built in guard rails allow for overhead conveying.
Standard Specifications:
Bed - 5 1/2" deep x 14 gauge painted formed steel channel frame. Bed section are 10 feet and 5 feet long, bolted together with splice plates and floor supports. Belt - 12", 18", 24", 30", 36", 42", and 48" wide, black PVC 90, FS top side, brushed bottom side, with clipper lacing. Guard Rail - 6" high x 16 gauge formed, painted steel on both sides, full length of bed sections. Underside Guards - Formed 16 gauge pans full length of bed sections, removable, secured with TEK screws. Tail Pulley - 4" diameter crowned with 1 3/16" diameter shaft. Drive Pulley - 4", 6", and 8" diameter crowned and fully lagged. 4" and 6" diameter pulleys have 1 3/16" diameter shaft, 8" diameter pulley has 1 7/16" diameter shaft., Snub Roller - 2" diameter for 4" and 6" diameter pulleys, 2 1/2" diameter for 8" diameter pulley. Return Rollers - 1.9" diameter placed on 10 feet centers. Floor Supports - Adjustable 30" to 44" from floor to top of belt. One floor support provided at each end of conveyor and at each bed joint. Take-Up - 6" long screws at tail pulley to provide belt tension. Bearings - Sealed, prelubricated with cast iron housings. Speed Reducer - C-Face mounted heavy duty worm gear reducer. Motor1/2 HP 230/460-3-60 TE motor. Capacity - 10 pounds per foot maximum live load.
SBT - Slider Bed Trash Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
