Ideal Motion is a leading supplier of zero pressure photo eye controlled accumulation belt driven live roller conveyor. Zero pressure photo eye controlled accumulation belt driven roller conveyor is a medium duty zero pressure accumulation conveyor ideally suited for the following applications:  Zero pressure accumulation, Transportation, Staging, Diverging and Merging.

 Standard Specifications:

Feature-for-feature, no other conveyor sys-tem on the market matches with the Zero Pressure Photo Eye Accumulation Live Roller Conveyor. There are no minimum weight restriction and it will convey items weighing as much as 250 pounds while running smoothly and quietly without stress. The custom designed integral photo- eye/solenoid module locally monitors and controls each zone of the accumulation conveyor. Multi- color LED’s provide a constant status of the photo- eye and the solenoid. A built-in time delay feature in the photo-eye increases throughput by preventing intermittent slowing of the product load. The photo-eye sensor is capable of sensing the presence of a wide variety of product loads including very light product and product with uneven bottoms. The photo-eye can also be skewed to sense totes or other product that leave gaps between items when accumulated. It releases in singulation mode, but can support slug discharge applications without requiring air or electrical modifications. Any accumulation photo-eye can be used to extract and send line condition information to the programmable controller for use in system control.

Bed Section: 6” Deep x 1 3/8” Flange x 10 Gauge frame in 12” increments between 72” and 144”. Accumulation zones are 24” or 36”. Galvanized Rollers: 1 7/8” Diameter, 16 Gauge, with 7/16” hex axle. Drives: 6”, 8”, or 10” Center Drives and 6” or 8” End Drives. Lagged pulley with automatic spring take-up on center drive. 8” wide Type 6 Friction x Friction belting. 3/4 HP to 5 HP 230V-460V/3-Phase/60Hz. “C” face TEFC motor with reducer. Speed range is 60-320 FPM. Terminal End: 4” or 6” Diameter plain pulley. Photo Eye/Solenoid Sensor Assembly: 24 VDC photo-eye/solenoid module with polarized retro-reflective eye. Axle Isolators: Specially designed conductive plastic insert isolates carrying roller axles from the conveyor frame to reduce noise and prevent wear.

Typical Applications: Transportation Zero Pressure Accumulation Nominal Widths: 18”, 24”, 30” & 36” Options: Take-Ups, Guard Rails, and & Supports High Speed Rollers (std. over 180 FPM). Staging Diverging & Merging Between Rail Widths: 15 1/2”, 21 1/2”, 27 1/2” & 33 1/2” Cog Drive Belt 24” & 36” Accumulation Zones Pop-Out Carrying Rollers Live Load Capacity: Up to 100 lbs/ft. depending on width, Carrying Roller Centers: 2”, 3” & 4” Urethane Coated Rollers Machine Crown Pulleys roller centers, supports, etc. Lifter Roller Centers: Terminal End Covers Pop-Out roller at Terminal End 6” & 12” Automatic & Manual Air Brakes Slug Release Powder Coat or Galvanized Finish

PE - Photo Eye Accumulation Belt Driven Live Roller Conveyor

Zero pressure photo eye controlled accumulation conveyor.