Ideal Motion is a leading supplier of FTC inclined slider bed floor to floor conveyor. FTC inclined slider bed floor to floor conveyor is ideally suited for the following applications: Booster conveyor for gravity flow systems. Transporting between floors. Center Drive.
Standard Specifications:
Belt - 14", 18", 24", 30" and 36" wide ruff-top belt. Bed - 20", 24", 30", 36" and 42" wide 12 gauge painted formed steel slider bed. Bed is 6 1/2" deep x 6 feet, 8 feet, or 10 feet long spliced together with splice plates. Under-Trussed Bed - Extra reinforcement to prevent sag in longer bed sections in addition to reinforcing angles, 24 feet and longer. Double Nose-Over - Two 16" long adjustable bed sections provide a two step transition from inline to horizontal with 15° to 35° adjustment. Tail Pulley - 4" diameter, crowned with 1 3/16" diameter shaft through 30" wide belt. 6" diameter tail pulley with 1 7/16" diameter shaft turned down on ends for wider than 30" belt. Drive Pulley - 8" diameter crowned and lagged. 1 7/16" diameter shaft. Snub Roller - 2 1/2" diameter at drive pulley and 2" diameter at tail pulley. Return Idlers - 1.9" diameter, adjustable. Take-Up - Located in center drive assembly, provides 24" belt take-up. Pop-Out Roller - Free floating, 1 3/8" diameter rollers located at tail pulleys with gravity connector rods. Will lift out if anything is caught between pulleys and rollers. Floor Supports - Adjustable stands to give 31" to 45" height at each end; with knee braces. Bearings - Sealed prefabricated with cast iron housings. Speed Reducer - C-Face mounted heavy worm gear reducer. Motor - 3/4 HP 230/460-3-60 TE Motor. Belt Speed - 60 FPM Constant. Capacity - 100 lbs. per foot maximum live load. Not to exceed Load Capacity Chart.
FTC - Inclined Slider Bed Floor to Floor Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
