Ideal Motion is a leading supplier of AutoRoll incline or decline belt over roller motorized roller conveyor. AutoRoll incline or decline belt over roller motorized roller conveyor is ideally suited for the following applications:  Transportation Elevation Changes.

 Standard Specifications:

The AutoRoll™ Motorized Roller (AR) conveyor is available in various con- figurations to support numerous system applications. It is quiet, safe, requires low-to-no maintenance, and offers high speed and non-contact zero pressure accumulation. Level conveyor, inclines, declines, curves and sweeps can all accumulate product without bumping, getting side-by-side, skewing or jamming. Intermixed products, such as totes, slave pallets and cartons can be handled simultaneously even when there are extreme differences in weights from one product to the next. AutoRoll™ conveyor features run-on-demand zones. It only runs when required to advance product, thereby reducing energy consumption and overall noise generation as well as extending the functional life of the conveyor. When comparing actual power consumption of two (2) like systems with same or similar throughputs, AutoRoll™ consumed only 30% of what a comparable 460 Volt 3 Phase system would consume. This can represent a significant savings that is not often considered. AutoRoll™ conveyor has an extremely quiet OSHA approved sound level. As an added consideration, because AutoRoll™ is run-on-demand, there is no sound generated when the zones are in accumulation mode, or when product is not present.

Bed Section: Rollers Low In Frame: 7 1/2” Deep x 1 1/2” Flange x 12 Gauge channel frame. Includes side covers. Rollers: 1 7/8” Diameter, 16 Gauge, carrying roller with 7/16” hex axle. Drive Rollers: (2) ITOH 24VDC Brushless Motor Driven Rollers per accumulation zone on incline units. (1) ITOH 24VDC Motor Driven Brake Rollers per accumulation zone on decline units. Includes wire harness and motor control card. Belt Over Roller: Depending on conveyor width, two to five 4" wide flat belts are provided per accumulation zone. Sensor: Rollers LIF: Side-mounted 24VDC polarized retro reflective photo-eye. Axle Isolators: Specially designed conductive plastic insert isolates carrying roller axles from the conveyor frame to reduce noise and prevent wear. Finish: Conductive powder coated paint to prevent static charge build-up.

Typical Applications: Transportation Elevation Changes Between Rail Widths: 15 1/2”, 21 1/2”, 25 1/2” & 31 1/2” Options: Guard Rails & Supports High Speed Rollers Live Load Capacity: 75 lbs. per carton Nose over Splice: Adjustable 12 to 20 degrees Drop Kit Punched for Top Mount Guard Rail Nominal Widths: 18”, 24”, 30”, & 36” Power Feeder Unit: Bed length is 48” for 24” zones and 60” for 30” zone.

AR - AutoRoll Incline or Decline Belt Over Roller Motorized Roller Conveyor