Ideal Motion is a leading supplier of air operated blade stop or roller stop.

Ideal Motion is a leading supplier of air operated blade or roller stop. The air operated blade or roller stop is ideally suited for the following applications: • Air Operated Stops are used where automatic line control is required such as assembly work stations, shipping areas, etc. • Can be mounted to underside of models 138SR, 190SR, 20SR, 190CAP, 138CAP, 190ZPA.
Standard Specifications: Capacity - Blade -150 Ibs., 1-3⁄8" roller - 50 Ibs., 1.9" diameter roller -150 Ibs. All are live load capacities @ 60 FPM. Bearings - High capacity (2) bolt flange bearings. Stop - 1-3⁄8" diameter x 18 gauge unplated steel roller for 1-3⁄8" conveyors. 1.9" diameter x 16 gauge galvanized steel roller for 1.9" x 2.0" conveyors. Blade - 1⁄4" steel plate. Position - Supplied normally down. Air Cylinder - 11⁄4"bore x 2" stroke double acting air cylinder to raise or lower stop. Air Requirements - Minimum pressure 60 PSI, maximum 100 PSI. Free air consumption @ 60 PSI - .014 cu. ft. per cycle, @ 100 PSI - .022 cu.ft. Valve - Single solenoid 4 way valve. 1⁄4" spring return- 20 NPT valve ports. Electrical requirements - 120V, single phase, 60 Hertz. Current draw - .068 amps, or 24VDC.		Air Operated Blade or Roller Stop

Top of Page