Ideal Motion is a leading supplier of 251CRR heavy duty chain driven live roller with 3" centers conveyor. 251CRR heavy duty chain driven live roller with 3" centers conveyor is a heavy duty conveyor ideally suited for the following applications: Slip sheet applications, 3" roller centers, Handles pallets, 4,000 lbs. capacity.
Standard Specifications:
Bed - Conveying surface width 16", 20", 24", 28", 30", 34", 36", 40", 44", 48", 52", and 56". Heavy Duty 4" and 4-3/4" deep x 4 gauge powder painted formed steel channel frame with heavy duty cross braces. Frames are bolted together with butt couplings and floor supports. Rollers - 2-1/2" diameter x 11 gauge steel rollers, grease packed and labyrinth sealed bearing, 11/16" hex shaft. Rollers are spaced on 3" centers and set 1/4" high on side rail opposite chain drive. Drive Chain - RC40 chain is used for roller connections. Floor Supports - Heavy duty supports are adjustable 24-1/2" to 34" from floor to top of roller. One support at every bed joint and end of conveyor. Formed angle knee braces are supplied for each support. Center Drive - Mounted underneath conveyor near center of conveyor length. Minimum elevation with standard drive mounting is 18" to top of roller. Bearings - Sealed and prelubricated ball bearings. Chain Guard - Chain guard is on one side only, extends 7/8" above top of rollers. Lower chain guard is mounted on bottom of conveyor frame. Upper chain guard is mounted to top of conveyor frame to totally enclose drive chains. Speed Reducer - Heavy duty, sealed worm gear reducer. Motor - 3/4 HP 230/460-3-60 TE motor. Speed - 30 FPM constant. Maximum Conveyor Length - Maximum conveyor length with one drive not to exceed 40 feet. Capacity - 4000 lbs. maximum distributed live load on any conveyor length.
251CRR - Heavy Duty Chain Driven Live Roller with 3" Centers Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
