Ideal Motion is a leading supplier of 251CDA heavy duty mechanically controlled chain driven pallet accumulation conveyor. 251CDA heavy duty mechanically controlled chain driven pallet accumulation conveyor is a heavy duty conveyor ideally suited for the following applications: Zero pressure accumulation, Mechanically operated, Heavy duty construction, Chain driven rollers.
Standard Specifications:
Frame - Heavy duty 12-1/2" deep x 7 gauge powder painted formed steel channel with heavy duty cross braces. Frames are bolted with spice plates and floor supports. Rollers - 2-1/2" diameter x 11 gauge steel rollers, grease packed and labyrinth sealed bearings, 11/16" hex shaft. Rollers are spaced on 4" or 6" centers, set 7/8" low. Floor Supports - Adjustable 25-5/8" to 30-1/4" (HD-4) from floor to top of roller, for each end of conveyor and at each bed joint along with knee braces for each support. Supports on 5 foot centers, change with zone length. Minimum elevation with standard drive location 24". Drive - Located near center of conveyor length, underneath conveyor frame. Drive Chain - RC #40 for roller to roller connections, RC #60 chain drives each zone. Chains are totally enclosed by metal guards. Accumulation Zones - Standard zone lengths are 60" long with a maximum of 30 zones per single drive Motor - 3/4 HP 230/460-3-60 TE motor. Electrical Controls - Input to a power supply. Conveyor Speed - 30 FPM constant roller speed. Speed Reducer - Heavy duty, sealed worm gear, C-Face. Bearings - Non-reversing sealed pre-lubricated with cast iron housing Capacity - Minimum unit load - 50 pounds. 4000 pounds maximum unit load.
251CDA - Heavy Duty Mechanically Controlled Chain Driven Pallet Accumulation Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
