Ideal Motion is a leading supplier of 251ACDA heavy duty air operated sensor roller chain driven pallet accumulation conveyor. 2251ACDA heavy duty air operated sensor roller chain driven pallet accumulation conveyor is a heavy duty conveyor ideally suited for the following applications: Zero pressure accumulation, Air operated, Heavy duty construction, Chain driven rollers.
Standard Specifications:
Frame - Heavy duty 7" deep x 4 gauge powder painted formed steel channel with heavy duty cross braces. Frames are bolted together with splice plates and floor supports. Rollers - 2-1/4" diameter x 11 gauge steel rollers, grease packed and labyrinth sealed bearings, 11/16" hex shaft. Rollers are spaced on 4" or 6"centers, set 2-1/4" low. Floor Supports - Adjustable 18-3/4" to 23-3/8" (HD-4) from floor to top of roller, for each end of conveyor and at each bed joint along with knee braces for each support. Supports on 5 foot centers, changes with zone length. Drive - Located near center of conveyor length, shaft mount motor and reducer. Drive Chain - RC #40 chain used for roller to roller connections, RC #60 chain drives each zone. Chains are totally enclosed by metal guards. Accumulation Zones - Standard zone lengths are 60" long with a maximum of 30 zones per single drive. Each zone is driven by an air clutch and controlled by a sensor roller. Motor - 3/4 HP 230/460-3-60 TE motor. Electrical Controls - 110/1/60 electric solenoid and air switch for discharge zone. Conveyor Speed - 30 FPM constant roller speed. Capacity - 4000 pounds maximum unit load. Total conveyor live load not to exceed Load Capacity Chart (see catalog page). Speed Reducer - Heavy duty, sealed worm gear, C-Face. Bearings - Sealed pre-lubricated with cast iron housings.
251ACDA - Heavy Duty Air Operated Sensor Roller Chain Driven Pallet Accumulation Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
