Ideal Motion is a leading supplier of 190LS line shaft live roller accumulation conveyor. 190LS line shaft live roller accumulation conveyor is ideally suited for the following applications: Low pressure accumulation, Clean room installation, Economical transportation conveyor, Assembly conveyor.
Standard Specifications:
Driving Belts - 3⁄16" diameter round urethane "O" rings from drive shaft to tread rollers. Bed - 7" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame with heavy duty cross braces and splice plates. Rollers - 1.9" diameter x 16 gauge galvanized steel tread rollers with 7⁄16" hex shaft and sealed, greased for life bearings, spaced on 3" centers. Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of tread roller. One support supplied at each end of conveyor and at each bed joint. Drive - 2 foot module with motor and reducer. Drive module will be bolted to intermediate section. Drive Shaft - 1" diameter steel shaft, driven by motor and reducer, runs full length of conveyor. Chain coupling supplied at bed joints to couple sections together. Drive Spools - Delrin spools located on drive shaft supplies driving power to tread rollers. Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision ball bearings on drive shaft. Speed Reducer - C-Face mounted, heavy duty worm gear reducer. Motor - 1⁄2 HP 230/460/3-60 TE motor. Drive Guard - Perforated metal guard full length of conveyor covers drive shaft and other moving drive components. Conveying Speed - 60 FPM constant. Capacity - 15 lbs. per tread roller maximum.
190LS Line Shaft Live Roller Accumulation Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
