Ideal Motion is a leading supplier of 190LSE line shaft live roller photo eye controlled accumulation conveyor. 190LSE line shaft live roller photo eye controlled accumulation conveyor is ideally suited for the following applications: Zero pressure accumulation, True product singulation, Clean room installation, No mechanical sensor rollers, photo eye controlled.

 Standard Specifications:

Driving Belts - 3⁄16" diameter round urethane "O" rings from drive shaft to tread rollers. Bed - 7" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame with heavy duty cross braces and splice plates. Rollers - 1.9" diameter x 16 gauge galvanized steel tread rollers with 7⁄16" hex shaft and sealed, greased for life bearings, spaced on 3" centers. Sensing Device - NEMA 1 photoelectric sensor in each zone detects presence of product and activates accumulation feature in the trailing zone if upstream zone is occupied. Power Supply - 120 VAC power supply controls accumulation feature with 24 VDC output. Power supply will control 50 accumulation zones. Air Requirements - 20 to 35 psi recommended operating pressure with free air consumption of .0062 cu. ft. per sensor operation. Accumulation Zones - 24", 30", or 36" long, air operated. Conveyor frame length changes with zone lengths. Note: Zone length must be evenly divisible by roller centers. Filter/Regulator - Supplied loose for mounting to conveyor side frame, with 3⁄8" NPT ports. Guard Rails - 1-1⁄2" x 1-1⁄2" x 12 guage galvanized guard rails - both sides. NOTE: Product contact with guard rails will affect product flow. Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of tread roller. One support supplied at each end of conveyor and at each bed joint. Drive - 2 foot module with motor and reducer. Drive module will be bolted to intermediate section. Drive Shaft - 1" diameter steel shaft, driven by motor and reducer, runs full length of conveyor. Chain coupling supplied at bed joints to couple sections together. Drive Spools - Delrin spools located on drive shaft supplies driving power to tread rollers. Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision ball bearings on drive shaft. Speed Reducer - C-Face mounted heavy duty worm gear reducer. Motor - 1⁄2 HP 230/460/3-60 TE motor. Drive Guard - Expanded metal guard full length of conveyor covers drive shaft and other moving drive components. Conveying Speed - 60 FPM constant. Capacity - 15 lbs. per tread roller maximum.

190LSE Line Shaft Live Roller Photo Eye Controlled Accumulation Conveyor