Ideal Motion is a leading supplier of 190ABE medium duty belt driven live roller conveyor with photo eye control. 190ABE medium duty belt driven live roller conveyor with photo eye control is a medium duty zero pressure accumulation conveyor ideally suited for the following applications:  Zero pressure accumulation, Air operated zones, No mechanical sensor rollers, and Photo eye controlled.

 Standard Specifications:

Driving Belt - Black PVC 120 belt. Bed - Roller bed width between frames, 15", 21", 27", 33", and 39". 7" x 1-1/2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports. Frame sections are 10' 0" and 5' 0" long. Tread Rollers - 1.9" diameter x 16 gauge galvanized steel rollers spaced on 3" or 6" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers. Pressure Rollers- 1.9" diameter x 16 gauge galvanized steel rollers with 7/16" hex shaft spaced on 6" and 12" centers. Raised by air to drive tread rollers, lowered when sensing device is activated. Sensing Device - NEMA 1 photoelectric sensor in each zone detects presence of product and activates accumulation feature in the trailing zone if upstream zone is occupied. Power Supply - 120 VAC power supply controls accumulation feature with 24 VDC output. Power supply will control 50 accumulation zones. Air Requirements - Operating pressure is 20-35 psi on main trunk line. Accumulation Zones - 24", 30", or 36" long, air operated. Conveyor frame lengths change with zone lengths. NOTE: Zone length must be evenly divisible by roller centers. Filter/Regulator - Supplied loose for mounting to conveyor side frame, with 3/8" NPT ports. 35 to 40 psi recommended operating pressure with free air consumption of .0062 cu. ft. per sensor operation. Guard Rails - 1-1/2" x 1-1/2" x 12 gauge galvanized angle guard rails, both sides. NOTE: Product contact with guard rails will affect product flow. Tail Pulley - 4" diameter crowned with 1-3/16" shaft. Drive Pulley - 8" diameter crowned and fully lagged with 1-7/16" diameter shaft. Located at infeed end of conveyor. Snub Roller - 2-1/2" diameter adjustable, located directly behind drive pulley. 2" diameter at each end directly behind terminal pulleys Return Idlers - 1.9" diameter adjustable on 10'0" centers. Floor Supports - 31-1/2" to 45-1/2" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint. Take-Up - Screw type take-up located at end of conveyor to maintain belt tension. 12" of belt take-up provided.

190ABE - Medium Duty Belt Driven Live Roller Conveyor with Photo Eye Control

Medium duty zero pressure photo eye controlled accumulation conveyor.