Ideal Motion is a leading supplier of 138CLRS light duty V-belt driven roller curve spur conveyor. 138CLRS light duty V-belt driven roller curve spur conveyor is ideally suited for the following applications: Used for merging or diverging, Gives positive drive, Can be slave driven by 138CAP.
Standard Specifications:
Driving Belt - "B" section V-belt. Bed - Roller bed width between frames, 10" 13", 16", and 22". 5-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel frame. Tread Rollers - 1-3/8" diameter x 18 gauge galvanized steel tread rollers, 1-1/2" centers, 5/16" hex shaft for 13" to 19" OAW. 2-1/2" to 1-11/16" tapered roller for 25" OAW conveyor, 7/16" hex shaft. Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give required driving force. Floor Supports - One support adjustable 30" to 44" from floor to top of rollers. Center leg on outer rail of 138CLRS. Tangent - 12" long, on one end of curved spur. Take-Up - Screw take-up provided to insure proper V-belt tension. Mounted in conveyor frame. End Drive - Mounted below bed section. Bearings - Sealed pre-lubricated with cast iron housings. Speed Reducer - C-Face mounted heavy duty worm gear reducer. Motor - 1/2 HP 230/460-3-60 TE motor. Conveying Speed - 60 FPM constant. Capacity - 300 lbs. total distributed live load.
138CLRS - Light Duty V-Belt Driven Roller Curve Spur Conveyor
Copyright © 2007 Ideal Motion, LLC. All rights reserved..
legal I privacy
