Ideal Motion is a leading supplier of 138CAP belt driven live roller conveyor. 138CAP belt driven live roller conveyor is a light duty minimum pressure accumulation conveyor ideally suited for the following applications:  Accumulating light boxes, totes, bins, baskets with minimal back pressure.

 Standard Specifications:

Driving Belt - 4" wide Black PVC 120 belt. Bed - Roller bed width between frames, 10", 13", 16" and 22". 5-1⁄2" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports. Tread Rollers - 1-3⁄8" diameter x 18 gauge galvanized tread rollers with 5⁄16" hex shafts on 1-1⁄2" and 3" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers. Pressure Rollers - 1-3⁄8" diameter x 18 gauge galvanized pressure rollers with 5⁄16" hex shafts on 6" centers. X-Bracing - Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking. Tail Pulley - 4" diameter crowned with 13⁄16" shaft. Drive Pulley - 4" diameter crowned and fully lagged,with 1-3⁄16" diameter shaft. Located at infeed end of conveyor. Snub Roller - 2" diameter adjustable, located directly behind drive and tail pulley. Return Idler - 1.9" diameter, adjustable, on 10'0" centers. Floor Supports - 30" to 44" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint. Take-Up - Located at discharge end of conveyor, provides 12" of belt take-up. Bearings - Sealed, prelubricated with cast iron housings. Speed Reducer - Heavy duty worm gear reducer. Motor - 1⁄2 HP 230/460-3-60 TE motor. Belt Speed - 60 FPM constant. Capacity - 100 pounds per foot. Not to exceed Load Capacity Chart.

138CAP - Belt Driven Live Roller Conveyor

Light duty minimum pressure accumulation conveyor.